Transport and suction systems

CMP series single-phase loaders

The single-phase loaders of the CMP series are designed to pneumatically receive (suction) powdery flowable materials with a specific weight of less than 0.8 kg/dm³. Their application is limited to flow rates below 200 kg/h with a transfer distance of less than 15 metres.

  • Storage capacity from 2 to 12 litres.
  • For the dimensioning of the flow rate, depending on the circuit and the material to be transported, it is necessary to consult our technical department.

Three-phase loaders CTP series

The three-phase loaders of the CTP series are designed to pneumatically receive (suction) extremely free-flowing dusty materials with a specific weight of no less than 0.5 and no more than 1.2kg/dm³. They can operate individually, connected to a suction unit, or in batteries consisting of several loaders connected centrally to the same suction unit.

  • Storage capacity from 12 to 100 litres.
  • For flow rate dimensioning, depending on the circuit and the material to be
    transported, you must consult our technical department.

CTF series three-phase loaders

The three-phase loaders of the CTF series are designed to receive dusty materials pneumatically (suction).
They can operate individually, connected to a suction unit, or in batteries consisting of several loaders connected centrally to the same suction unit.

  • Storage capacity from 12 to 70 litres.
  • For the dimensioning of the flow rate, depending on the circuit and the material to be transported, it is necessary to consult our technical department.

CJM series loaders

The CJM series pneumatic feeders are the most effective and economical granule feeders for plastics processing machines up to a capacity of 400 kg/h. The compressed air feeding system makes them extremely versatile and reliable thanks to their fully automatic operation.

Their operation is also applicable for extremely free-flowing powders thanks to the air-cleaned fltrating membrane. Their easy programming allows the user to best set the work cycle, avoiding unnecessary automation costs.

  • Storage capacity from 1 to 5 litres.
  • For the dimensioning of the flow rate, depending on the circuit and the material to be transported, it is necessary to consult our technical department.

CTM series single-phase loaders

The three-phase loaders of the CTM series are used to pneumatically receive (suction) extremely free-flowing dusty materials with a specific weight of no less than 0.5 and no more than 1.2kg/dm³. They can operate individually, connected to a suction unit, or in batteries consisting of several loaders connected centrally to the same suction unit.

  • Storage capacity from 30 to 120 litres.
  • For the dimensioning of the flow rate, depending on the circuit and the material to be transported, it is necessary to consult our technical department.

CTJ series three-phase loaders

The three-phase loaders of the CTJ series are used to pneumatically receive (suction) dusty materials. They can operate individually, connected to a suction unit, or in batteries consisting of several loaders connected centrally to the same suction unit.

  • Storage capacity from 40 to 350 litres.
  • For the dimensioning of the flow rate, depending on the circuit and the material to be transported, it is necessary to consult our technical department.